hy

中文 | EN

imgboxbg
dq

/
/
Common Heat Transfer Vinyl Mistakes
NEWS 

Common Heat Transfer Vinyl Mistakes

  • Categories:News
  • Time of issue:2021-05-17 10:48
  • Views:0

Common Heat Transfer Vinyl Mistakes

Information

Common Heat Transfer Vinyl Mistakes

1.NOT ENOUGH PRESSURE 

Not enough pressure and your design may not stay put for long increase pressure on your press or iron on a more sturdy surface so you can use your body weight 

2.IMPROPER HEAT OR PRESS TIMES

Not long or high enough and your material won't adhere.Too long and you risk burning or wrinkeling the material. Always check your material's heat settings before pressing 

3.LAYERED THE WRONG MATERIALS

Some materials like our matte glitter & liquid can be layered, while others like hologram & metallic cannot. Check your supplier's recommendations before you layer any HTV material

4.WATCH OUT FOR SEAMS, ZIPPERS ETC.

Fabric seams, zippers, buttons & garment details can all prevent you from getting the even pressure you need to apply designs. Try repositioning your design on your press, or using a pressing pillow or towl underneath

5.WAIT TO WASH

Wait 24hours before you wash garments with your designs to ensure the HTV has had proper time to cure and adhere

6. DON'T FORGET ABOUT A FINAL PRESS

Before you take your garment off the press, make sure you go over the entire design once more with heat to ensure every layer and piece is firmly adhered to whatever you're pressing on

7. OPT FOR HIGH QUALITY PRODUCTS 

If you're still having issues, it may be the HTV. Some HTV does not last as long as others. Choose a high quality product & always use the correct recommendations for each material.

Contact Us 

 

Tel:86-551-63444544 

Add: Building 4 and Building 7, Liandong U Valley, Southeast of the Intersection of Fanhua Avenue and Jilin Road, Baohe Economic Development Zone, Hefei City

 

Hefei Runjie CNC Equipment Manufacturing Co., Ltd.    皖ICP备19011952号-1    Powered by: www.300.cn