新闻资讯
+
  • 4大平板机.jpg
  • 7大平板机.jpg
  • 3大平板机.jpg
  • 5大平板机.jpg
  • 2大平板机.jpg
  • 6大平板机.jpg
  • 8大平板机.jpg
  • 10大平板机.jpg
  • 刀(1).jpg

Saga New Flatbed Cutter FC6992 FC99122


Category: Flatbed Cutter

Main Feature 1. Safe warnings after booting. 2. Carriage/beam one-key to reach far-end and reset. 3. Quick media placement. 4. Real time pause intervention during cutting. 5. Upgraded cutting and creasing speed/pressure. 6. Mixed contour cutting. 7. Real time speed/pressure adjustment. 8. Intelligent control panel. 9. Bluetooth remote control. 10. Uninterrupted operation. The Saga FC Series flatbed cutter including plug-in software is ideal for small and medium-sized production and samples of packaging, swing tickets and even labels. Processing material including paper, card, synthetics, films and kinds of labels, up to 500gsm. Using advanced digital contour cutting technology, the Flatbed Cutter follows artwork cut lines drawn in Adobe® Illustrator® or CorelDRAW®, no cutting dies required, the sheets are produced to any shape, instantly and directly from the desktop. It can handle full cutting, half cutting, creasing and even drawing. Application: Cardboard, stickers, kraft paper, pvc, pet, plastic thin board, fibrous cardboard, rubber sheet, film etc,. PVC: Less than 0.4mm Reflective Film: All types Sandblast, Hard paper: Less than 450gsm Magnetic Sticker: Less than 600micron PET: Less than 0.3mm, vinyl, etc.  


Product Detail

The Saga FC Series flatbed cutter including plug-in software is ideal for short run and medium-sized production and samples of packaging, swing tickets and even labels. Processing material including paper, card, synthetics, films and kinds of labels, up to 500gsm.
Using advanced digital contour cutting technology, the Flatbed Cutter follows artwork cut lines drawn in Adobe® Illustrator® or CorelDRAW®, no cutting dies required, the sheets are produced to any shape, instantly and directly from the desktop. It can handle full cutting, half cutting, creasing and even drawing.

Main Feature

1. Safe warnings after booting.

2. Carriage/beam one-key to reach far-end and reset.

3. Quick media placement.

4. Real time pause intervention during cutting.

5. Upgraded cutting and creasing speed/pressure.

6. Mixed contour cutting.

7. Real time speed/pressure adjustment.

8. Intelligent control panel.

9. Bluetooth remote control.

10. Uninterrupted operation.

Application:

Cardboard, stickers, kraft paper, pvc, pet, plastic thin board, fibrous cardboard, rubber sheet, film etc,.
PVC: Less than 0.4mm
Reflective Film: All types
Sandblast, Hard paper: Less than 450gsm
Magnetic Sticker: Less than 600micron
PET: Less than 0.3mm, vinyl, etc.

Specifications

 

Keywords:

speed

and

real

cutting.

time

beam

quick

panel.

carriage


Submit Message